Epoxy Zinc Phosphate Primer Spray on Rust Paint for Marine Steel

Epoxy Zinc Phosphate Primer Spray on Rust Paint for Marine Steel

Technical Specification Product Name: Epoxy Zinc Phosphate Primer Model No: 725-EP1301 Product Description 1. A two pack epoxy primer containing zinc yellow anticorrosive pigment 2. VOC is 280 g/L Intended Uses 1. For use at steel structure 2. For use at Newbuilding, Maintenance and Repair or on...

Product Details

Technical Specification
Product Name: Epoxy Zinc Phosphate Primer
Model No: 725-EP1301

Product Description
1. A two pack epoxy primer containing zinc yellow anticorrosive pigment
2. VOC is 280 g/L

Intended Uses
1. For use at steel structure
2. For use at Newbuilding, Maintenance and Repair or on board maintenance.

Product Information
1. Volume Solids 75%±3%
2. Finish/Sheen Gloss
3. Typical Film Thickness 40-75microns dry ( 75-135 microns wet)
4. Theoretical Coverage: 12㎡/L/40 μm  at typical film thickness
5. Mix Ratio: 4:1(volume) 4:1:1.2-1.6(mass)
6. Method of Application
    Airless Spray Tip size range 0.019-0.021
    Output Pressure ≥17MPa
    Air Spray Tip size range 2-3mm
    Output Pressure ≥0.4MPa
    Brush/Roller Need to coat several times to get film thickness
7. Thinner: Not recommended. Use water only in exceptional circumstances(max 5% by volume)
8. Temperature(℃) 5 10 20 30
    Pot life(hrs) 18 12 8 6
    Overcoatings Data: Substrate Temperature
    Temperature(℃) 5 10 20  30
    Dry to touch(hrs) 8 3  2  1
    Dry hard(hrs) 8 6 3 2
    Overcoating interval(hrs) 8  6 4 2
9. Storage: Store in cool and dry conditions, Well ventilate. Keep away from hot and fire.Store temperature should be higher than 0°C.
    Shelf Life: 12Months minimum at 25°C, Subject to re-inspection thereafter.
10. Pack Size:
      Park A: 23.68kg/18L in 20L container
      Park B: 4.7kg/5L in 6L container


Inquiry