Polyurethane Deck Paint

Polyurethane Deck Paint

Recoatable polyurethane deck paint-Multicolor
Chat Now

Product Details

Product Description:

--- Model: 725-BS42-28

---A two pack polyurethane deck paint, giving excellent durability and long term recoatability

---VOC less than 390g/L


Intended Uses

-For use on deck.

-For use at Newbuilding, Maintenance and Repair or On Board Maintenance.


Product Information


Drying Information


Overcoating Data


Storage:

Store in cool and dry conditions,Well ventilate.Keep away from hot and fire. Shelf Life: 12 months

minimum at 25℃,Subject to re-inspection thereafter.


Pack Size:35.4kg/18L in 20 L container

Part A: Greater than 31℃  

Part B: Greater than 28℃

Mixed paint:Greater than 31℃


Systems and Compatibility:

Consult your Sunrui Representative for the systems best suited for the surfaces to be protected.


Surface Preparation:

High pressure fresh water wash or fresh water wash, as appropriate, and remove all oil or grease, soluble contaminants and other foreign matter in accordance with SSPC-SP1 solvent cleaning. All surfaces to be coated should be clean, dry and free from contamination.


Newbuilding/Major Refurbishment:

725-BS42-28should be applied over a recommended primer coating scheme. The primer surface should be clean, dry and free from contamination.

725-BS42-28 must be applied within the coating interval specified (consult the relevant product data sheet). Areas of breakdown, damage etc. should be prepared to the specified standard (eg.St3) and primed prior to the application of 725-BS42-28.


Repair/On Board Maintenance:

1)725-BS42-28 should be applied over a recommended primer coating scheme. The  primer  surface  should  be  clean,  dry  and  free  from  contamination.

2)725-BS42-28 must be applied within the coating interval specified (consult the relevant product data sheet). Areas of breakdown, damage etc. should be prepared to the specified standard (eg. St3) and primed prior to the application of 725-BS42-28.

3)725-BS42-28 may be applied directly over aged 725-BS42-28 following thorough fresh water washing and degreasing provided the coating to be overcoated is in an intact and tightly adherent condition. Loose or flaking coatings should be removed back to a firm edge and 725-BS42-28 or an appropriate primer should be used to repair the area before application of the full coat.


Limitations:

1)This product is not recommended for use in immersed conditions.

2)When applying 725-BS42-28 by brush or roller, for some colors, Two coats of 725-BS42-28 may be required to give uniform coverage, especially when applying 725-BS42-28 over dark undercoats.

3)Apply in good weather. Temperature of the surface to be coated must be least 3℃above the dew point when the humidity is lower than 85%.

4)The dry time and overcoating interval may change according to the environment factors.

5)Avoiding absorb the solvent steam and paint steam for long time. Skin and eyes must avoid contacting the paint. Pay attention to ventilate and fireproof when applying.


Duty statement:

1)The data in the sheet base on the information from the laboratory and practice.

2)The application may exceed the control, so we only ensure our product quality.

3)We own the right of the data sheet modification without informing.



Inquiry