Outdoor Marine Paint Varnish 40 Microns Dry A Two Pack Overcoatable Polyurethane Deck Paint

Outdoor Marine Paint Varnish 40 Microns Dry A Two Pack Overcoatable Polyurethane Deck Paint

Detailed Product Description Overcoatable polyurethane deck paint-Multicolor Product Description 1.A two pack acrylic polyurethane deck paint, giving excellent durability and long term overcoatbility. 2.VOC less than 390g/L Intended Uses 1.A tough cosmetic finish 2.For use in all above water...

Product Details

Detailed Product Description

Main Raw Material:PolyurethaneStandard Film Thickness:40 Microns Dry (75 Microns Wet)
Application Method:SprayColor:Multicolor
Type:TopcoatLuster:Half Glazed
Theoretical Spreading Rate:200Solids (vol %):≤390g/L


Overcoatable polyurethane deck paint-Multicolor
Product Description

1.A two pack acrylic polyurethane deck paint, giving excellent durability and long term overcoatbility.
2.VOC less than 390g/L

Intended Uses
1.A tough cosmetic finish
2.For use in all above water areas
3.For use at Newbuilding-or Maintenance and Repair or on board maintenance.

Product Information
1.Volume Solids 57%±2%
2.Finish/Sheen gloss
3.Typical Film Thickness 40 microns dry ( 75 microns wet)
4.Theoretical Coverage :14.3㎡/lat typical film thickness
5.Mix Ratio: 6:1(Volume) 7.5:1(mass)
6.Method of Application
   Airless Spray Tip size range 0.38-0.53mm
   Output pressure ≥17mpa
   Brush/Roller For small area only
7.Thinner: Not recommended. Use water only in exceptional circumstances(Max5% by volume)
8.Drying Information
   5°C 15°C 25°C 35°C
   Touch Dry 4H 3H 2H 1H
   Hard Dry 48H 36H 20H 10H
   Pot Life 4H 3H 2H 1H
   Overcoatings Data: Substrate Temperature
   Overcoated By
   5°C 15°C 25°C 35°C
   Min Max Min Max Min Max Min Max
   48H no 36H no 20H no 10H no
9.Storage :Store in cool and dry conditions, Well ventilate. Keep away from hot and fire.
   Shelf Life: 12Months minimum at 25°C.Subject to re-inspection thereafter.
10.Pack Size:
    Park A 22.5KG/17L in 20L container
    Park B 3KG/3L in 6L container.
11.Flash Point:
    Park A greater than 31°C
    Park B greater than 29°C
    Mixed paint greater than 31°C

Limitations
1. Apply in good weather. Temperature of the surface to be coated must be least 3°C above the dew point when the is lower than 85%
2. In common with all epoxy base coatings, this product will exhibit chalking of the film on UV exposure.
3. The dry time and over coating interval may change according to the environment factors.
4.Avoiding absorb the solvent steam and paint steam for long time. Skin and eyes must avoid contacting the paint. Pay attention to ventilate and fireproof when applying.

28-1.jpg


Inquiry