Detailed Product Description
|Main Raw Material:||Epoxy||Standard Film Thickness:||40 Microns Dry (75 Microns Wet)|
|Theoretical Spreading Rate:||200||Solids (vol %):||≤400g/L|
Epoxy deck paint-Multicolor Marine Spray Paint
1.A hard wearing two pack epoxy deck paint
2.VOC less than 400g/L
1.A tough cosmetic finish
2.For use at decks and deck fittings.
3.For use at Newbuilding-or Maintenance and Reair.
1.Volume Solids 53%±3%
3.Typical Film Thickness 40 microns dry ( 75 microns wet)
4.Theoretical Coverage 9.5㎡/lat typical film thickness
5.Mix Ratio: 2:1:1(Volume) 4:1(mass)
6.Method of Application
Airless Spray Tip size range 0.38-0.53mm
Output pressure ≥17mpa
Brush/Roller For small area only
7.Thinner: Not recommended. Use water only in exceptional circumstances(Max5% by volume)
10°C 25°C 35°C
30min 20min 10min
10°C 25°C 35°C
Touch Dry 6H 2H 1H
Hard Dry 48H 20H 16H
Pot Life 6H 4H 2H
Overcoatings Data: Substrate Temperature
5°C 15°C 25°C 35°C
Min Max Min Max Min Max Min Max
24H no 20H no 12H no 8H no
10.Storage: Store in cool and dry conditions, Well ventilate. Keep away from hot and fire.Store temperature should be higher than 0°C.
Shelf Life: 12Months minimum at 25°C.Subject to re-inspection thereafter.
Park A 22.8KG/14L in 20L container
Park B 5.7KG/6L in 9.25L container.
Park A greater than 31°C
Park B greater than 31°C
Mixed paint greater than 31°C
1.Apply in good weather. Temperature of the surface to be coated must be least 3°C above the dew point when the is lower than 85%
2.In common with all epoxy base coatings, this product will exhibit chalking of the film on UV exposure.
3.The dry time and over coating interval may change according to the environment factors.
4.Avoiding absorb the solvent steam and paint steam for long time. Skin and eyes must avoid contacting the paint. Pay attention to ventilate and fireproof when applying.