-- Model: 725-H06-19
--A two pack epoxy primer contains zinc yellow anticorrosive pigment.
--VOC less than 300g/L
-- For use at aluminum alloy.
--For use at Newbuilding, Maintenance and Repair or On Board Maintenance.
Store in cool and dry conditions,Well ventilate.Keep away from hot and fire. Shelf Life: 12 months
minimum at 25℃,Subject to re-inspection thereafter.
Part A: 23.5kg/15L in 20 L container
Part B: 4.7kg/5L in 6L container
Part A:Greater than 31℃
Part B:Greater than 29℃
Mixed paint:Greater than 31℃
Systems and Compatibility:
Consult your Sunrui Representative for the systems best suited for the surfaces to be protected.
All surfaces to be coated should be clean, dry and free from contamination.
The areas to be repaired should be cleaned to metal by mechanical method.
Abrade the area immediately surrounding the repair to provide a key for subsequent coating application. Overlap areas should be kept to a minimum.
1)This product will not cure adequately below 5℃ . For maximum performance,The surface should be solvent cleaned to keep clean, dry and free from metal corrosion products.
2)The substrate should be cleaned gently by sand paper, and then coated primer.Ambient curing temperature should be above 10℃.
3)Apply in good weather. Temperature of the surface to be coated must be least 3℃above the dew point when the humidity is lower than 85%.
4)In common with all epoxy base coatings, 725-H06-19 will exhibit chalking of the firm on UV exposure.
5)The dry time and overcoating interval may change according to the environment factors.
6)Avoiding absorb the solvent steam and paint steam for long time. Skin and eyes must avoid contacting the paint. Pay attention to ventilate and fireproof when applying.
1)The data in the sheet base on the information from the laboratory and practice.
2)The application may exceed the control, so we only ensure our product quality.
3)We own the right of the data sheet modification without informing.