-- Model: 725-C53-1
--A quick drying, single pack alkyd primer
--Overcoated time is not limited
--VOC less than 390g/L
--For use in all above water areas.
--For use at Newbuilding, Maintenance and Repair or On Board Maintenance.
Store in cool and dry conditions,Well ventilate.Keep away from hot and fire. Shelf Life: 12 months
minimum at 25℃,Subject to re-inspection thereafter.
Pack Size:26.5kg/18L in 20 L container.
Flash Point:Greater than 28℃.
Systems and Compatibility:
Consult your Sunrui Representative for the systems best suited for the surfaces to be protected.
High pressure fresh water wash or fresh water wash, as appropriate, and remove all oil or grease, soluble contaminants and other foreign matter in accordance with SSPC-SP1 solvent cleaning. All surfaces to be coated should be clean, dry and free from contamination.
Remove weld spatter and smooth weld seams and sharp edges. The surfaces should be blast cleaned to Sa2.5GB/T 8923.1-2011.The weld seams areas could be cleaned to St3GB/T 8923.1-2011using power tool.
The areas to be repaired should be cleaned to P St3 GB/T 8923.2-2008 by mechanical method or higher level of surface prepared to P Sa2.5 GB/T8923.2-2008by abrasive blasting. Abrade the area immediately surrounding the repair to provide a key for subsequent coating application. Overlap areas should be kept to a minimum.
Apply 725-C53-1 before oxidation occurs. If oxidation has occurred, the entire oxidized area should be reblasted to the standard specified above.
1)The data in the sheet base on the information from the laboratory and practice.
2)The application may exceed the control, so we only ensure our product quality.
3)We own the right of the data sheet modification without informing.