Toilet waterproofing/Repair PS 8800
Two component Polyaspartic waterproofing varnish, direct to tile, for hand applications
PS 8800 is solvent free,two-component, hand applied, Polyaspartic clear coating.
FIELDS OF APPLICATION
PS 8800 is used in kitchen, toilet and shower room waterproofing applications
FEATURES AND BENEFITS
fully bonded to the tile surface
excellent anti-slip property
cures fast,ready for use after 8-12 hours
PS 8800 is supplied in 2.9 kgs pakcages.
A=2.0 kgs B=0.9 kgs.LO
PS 8800 is colorless clear coatingPLICATION METHOD
(a) Surface preparation& Repair
Clean the tile surface, get rid of the dust and grease
(a) Brush the vertical surface
Mix component A and component B with the ratio of 1: 0.45, make it stirred thoroughly.The hight of vertical surface is recommended higher
than 1.5m, coverage is 0.2 kg/m2- 0.3 kg/m2( thickness about 0.15mm-0.25mm)
Begin the process at the top of the wall and work down to the floor. Complete the walls first and then begin the process on the floor.
Brush the flooring surface
Mix component A and component B with the ratio of 1: 0.45, make it stirred thoroughly. Recommended coverage is 0.3 kg/m2-0.4 kg/m2( thickness about 0.2mm-0.3mm)
Using a brush, apply one coat covering all surface area evenly with a layer of PS 8800.
Ready for use
Keep the room ventilatory for 8-12 hours, then it’s open for use.
Solid content by weight
30 Min- 2 Hour
9.7Mpa to tile surface
4.5Mpa to concrete
Elongation at break