Waterproof Roof Coating

Waterproof Roof Coating

Product Name: Polyurea Weather Resistance Elastic Waterproof Topcoat Paint Model: PS9500 Designed for use: Waterproofing and corrosion protection for concrete substrates (basements, bridges, roofs, warehouses, etc.)

Product Details

Product Name Polyurea weather resistance elastic waterproof coating

Model PS9500

Product introductionPS9500 is consist of Polyaspartic esters and variety of pigment, filler,additive and solvent. All main ingredients are manufactured by own.

Characteristic ■ Excellent weathering resistance,non-yellowing in 20 years

                             ■ Great adhesion with matched polyurea primer 

                             ■ Excellent elongation at break

                             ■ Excellent waterproofing and decorative function

Designed for useWaterproofing and corrosion protection for concrete substrates (basements, bridges, roofs, warehouses, etc.) 

Physical Parameters

Color colorless or according to customers’ requirement.

Weight Solid ≥60%

Flash point30±2

Viscosity 800±200CPS(25

Proportion1.07g/cm3

Luster Half-light or bright

Coating thickness(μm) Dry Film200-300   Wet film270550

Theoretical coating rateTheoretical value5.6/Kg/100μm

Actual value: varies according to various factors such as surface treatment, external environment, construction method, etc.

Main Technical indicators of Coating Film

Elongation300%                        test methodGB/T 16777-2008

Tensile Strength4MPa                  test methodGB/T 16777-2008

Adhesion (concrete)4MPa               test methodGB/T 5210-2006

Abrasive resistance(750g/500r):≦40         test methodGB/T 1768-2006

Construction parameters

Ratio 

Airless sprayMain paint: curing agent: thinner11

Brush and Roll coatingMain paint: curing agent:11

Coating available time 

Temperature(

5

10

20

25

Mixing(hrs)

4

3

2.5

2

Construction conditions: -15 ---30 , humidity: ≤ 85%

Substrate temperature: must be greater than the air dew point temperature above 3         

Construction method

Airless   spraying, air spraying, brushing and scratch

Airless   spray (two-component)

Recommended   Use

Nozzle   Size

0.190.23

Outlet   pressure

100120kg.cm3

Cleaning agent / thinner: Polyurea standard thinner

Note: If you use airless spray or brush, roller coating, please consult our engineers before use.

Drying time and coating interval

Temperature

5

5

10

20

30

Touch   dry

6h

4h

3h

1.5h

30min

Hard   dry

24

12

8

6

4

Painting   interval

24

12

8

6

4

 The above data are for guidance only. Actual drying time / time interval before coating can be long or short, depending on film thickness, ventilation, humidity, lower paint, preloading requirements and mechanical strength.

Painting matching

Applicable : polyurea supporting primer, polyurea middle coating, or refer to our recommended package

Surface treatment:

1,Rinse with salt water and other water-soluble dirt

2,Remove grease with a suitable detergent and degreaser

3,Make sure the surface is clean and dry before construction

4,Note the distance between the coating and the primer

 store:

Storage time: Paint: 1 year Curing agent: 1 year

Storage temperature: 0 -30

Packing:Paint: 20KG  curing agent: 10KG

 Security measures:

1,Avoid contact with skin and eyes

2,If the paint comes into contact with the skin, clean it with a suitable cleaning solution. If the paint touches the eyes, apply a lot of water

3,Flush and seek medical attention immediately

4, Ensure good ventilation

5,The paint contains combustible substances. Keep away from sparks and prohibit smoking in adjacent work areas

6,The site complies with all health and safety regulations

 Statement:

The information contained in this data sheet is based solely on our understanding in the laboratory and in practice. But because the use of the product are usually outside our control, so we only give the product itself quality assurance. We reserve the right to modify this manual without prior notice


Send Inquiry