Polyurea Crack Filler

Polyurea Crack Filler

Product Name : Polyurea Crack Filler Model : PS 700C 1,Product Description Polyurea Crack filler is a new type developed based on polyaspartic resin. Filled the domestic polyurea Crack filling blank, Solved the domestic Crack filling can not be cured at low temperature and outdoors, Not...
Chat Now

Product Details

Product Name Polyurea Crack Filler

ModelPS 700C

1,Product  Description

Polyurea Crack filler is a new type developed based on polyaspartic resin. Filled the domestic polyurea Crack filling blank, Solved the domestic Crack filling can not be cured at low temperature and outdoors, Not resistant to acid and alkali corrosion, Meantime, it is a real functional beauty filler material with has the beautiful decorative properties of  polyaspartic  polyurea material, fast drying, waterproof, abrasion resistance and weather resistance.

2,Product Features

1Outdoors never turn yellow, UV resistant, anti-aging

2Fast drying at low temperature, can be used normally at Zero 10 degrees Celsius

3:Waterproof and high toughness, resistant to cracking

4 Wear-resistant, anti-blackening, acid and alkali resistant, easy to clean.

5Safe, environmentally friendly, non-toxic, odorless

6:Convenient construction , high efficiency, no shrinkage, no falling,

3.Application

(1)Suitable for using on all kinds of counters, window sills, furniture, flooring, wall and other gaps, cabinets, the corners of bathroom and kitchen, can also be used to paste hard materials;

(2)Can be used for waterproofing, sealing and structural bonding of outdoor tiles

4.Temperature and curing time

Temperature⁰C

Dry timemin

Basic curingHrs

Fully cured (days)

0

120

24

15

15

50

10

7

25

25

4

3

35

10

2

3

5.Instructions External packaging

6.Shelf life 6 months

7,Attention

1.Double-tube static mixing mode. If there is no construction for more than 20 minutes, the material inside the hose will be solidified. Pay attention to the time limit during construction.

2.During the construction, it is not recommended to use the first 40cm material that has just been mixed in the rubber nozzle to avoid affecting the service life.

3.Avoid eye contact and long-term contact with skin that is not fully cured, away from children to prevent touch

 

Inquiry