Model:PA6376
Description
|
Composition |
A four-part coating cured by aspartic acid ester resin and isocyanate，added organic particle aggregate and thinner. |
|
Curing method |
Normal tempetature curing,0-35℃. |
|
Application |
Elastic floor coatings cover glossy finish. |
|
Features
|
High solid content, low toxicity and environmental protection, excellent weather resistance, good rebound, excellent scratch resistance and abrasion resistance. |
|
Package |
A agent 3.29kg, B agent 0.65kg, C agent 0.82kg, D agent 0.23kg. (ratio 100:20:25:7) |
|
Range of use |
Mainly used in schools, hospitals, playgrounds and other flexible floor coverings to improve the wear resistance, scratch resistance, and weatherability and yellowing resistance |
Material base data（25℃，60%RH）
|
A Agent |
B Agent
|
|
|
Appearance |
Colorless liquid |
Light yellow liquid |
|
Smell |
Non |
Slight |
|
Viscosity25℃ |
1400MPaS |
12MPaS |
|
Proportion25℃ |
1.1 |
|
|
Solid content |
95% |
Mixed material Data（25℃，60%RH）
Viscosity of mixed : 800MPaS
Mixing proportion (without aggregate):1.05
Mixed solids(with aggregate):83%
Potlife : 20min
Dry time:2hr
Walking Opening time: 8hr
Weight opening time: 48days
Operation time and temperature relation
Material physical properties after curing
Operation time and temperature relation
|
10℃ |
25℃，50%RH |
30℃，75%RH |
|
|
Usable time |
30min |
20min |
15min |
|
Finger touch |
4hr |
2.5hr |
2hr |
|
Tack Free |
16hr |
8hr |
6hr |
Material physical properties after curing
|
Paint film apperance |
Semi-matt light skid-resistant surface |
|
7th hardness |
HB |
|
Wear(CS17 wheel 750g,500 turn) |
20mg |
|
Anti-impact performance （1000g，1m） |
Pass |
Attention:
Construction prohibited when humidity is greater than 85%RH;
The curing agent component meets the water vapor extremely easily to deteriorate, saves must seal dry.
User's guidance:
After mixing, the material must be poured all over the floor and then scraped, so as to avoid the bottom of the aggregate and the poor surface effect;
Adopt the construction method of batch scraping firstly and then roller coating, and evenly collect the short wool or sponge roller;
Dosage strictly controlled in 0.08~0.1kg/m2, avoidaccumulation, otherwise foaming serious;
This material has very high requirements for construction. It must be trained by our company before use.
Storage: Ideal storage conditions is 5-35 ℃ in cool and dry place, avoid sun exposure.
