Desalination Water Tank Coatings

Desalination Water Tank Coatings

PS500C is a 100% solids, two-component, fast curing, high-performance on-site spray molding materials. The electric power industry is a critical part of economic infrastructure. The facilities should have effective application life which be required excellent anti corrosion waterproofing materials and advanced protective technology. It has the advantages of high strength, good performance and quick construction .

Product Details

Desalination Water Tank Coatings

Model No: PS500C 

1.Description 

PS500C is a 100% solids, two-component, fast curing, high-performance on-site spray molding materials. The electric power industry is a critical part of economic infrastructure. The facilities should have effective application life which be required excellent anti corrosion waterproofing materials and advanced protective technology. It has the advantages of high strength, good performance and quick construction .Based on the high reactivity and fast curing property, it can be sprayed forming at any bent, inclined and vertical surface without sagging. With super adhesive strength and impact resistance characteristics, the coating is flexible, impact resistant and seamless that able to completely insulate air and water and oxygen penetration. It integrated anticorrosion, waterproof, wear resistance, aging resistant performances, no pulverization and crack peel up or fall down after long- term outdoor work with alternating ambient conditions of cold, heat, rain and snow. It is the optimum choice where a tough, flexible, impact resistant, abrasion resistant waterproofing system which exhibits extraordinary performance characteristics. 

2.Features 

1>. Without any thinner, environmental protection;

2>. Elongation, high flexibility, can adapt to the basic cracks and slight deformation;

3>. Good aging resistance

4>. Fast curing, can be sprayed on any surface, slope, vertical surface;

5>. Convenient construction, spraying a film.

3.Performance

      Volume solid content

100%

      Hardness(shore)

90-95(A)

      Density

1.05g/cm3

      Elongation

≥450%

     Tensile strength

18MPa

      Impact strength 

≥80N/mm

      Water impermeability

0.4MPa,60min

Wear resistance (750g,500r) 

6mg

     Impact resistance

1.5kg.m

     Electric strength

15kv/mm

Temperature variation

-35------+120°C

Heating temperature

55-65°C

Recommended thickness

2400μm

Operating temperature range

0-35°C

Water resistance(30d)

no rust no bubbles no peel

Acid resistance (10%H2SO4 or 10%HCI, 30d)

no rust no bubbles no peel

Alkali resistance 10%NaOH, 30d 

no rust no   bubbles no peel

 Salt resistance 60g/L, 30d

no rust no   bubbles no peel

 Salt spray resistance (2000h)

no rust no bubbles no peel

Oil resistance 0# diesel crude oil 30d   

no rust no bubbles no peel


Send Inquiry