Detailed Product Description
|Main Raw Material:||Acrylic||Application Method:||Spray|
|State:||Liquid Coating||Water Resistance:||Good|
|OEM:||Accepetable||Usage:||Building Coating, Other|
General Water-Based Project Acrylic Exterior Wall Paint Topcoat
General water-Based project exterior emulsion paint is a kind of environment-friendly, water base exterior emulsion paint, which can provide an excellent hide, more coverage finish with fresh odor. Economic type most suitable for project use.
High performance but low price
Strong hiding power
Good leveling property
Main Composition:Acrylic copolymer emulsion, pigment, additives and water.
Scrubbing resistance: more than 2000 times
Water resistance:More than 96 hours alkali resistance: 48 h
Solvent Type: Water-based
Resin Type: Acrylic resin
Gloss:Matt(5～6% on a 60°meter)
Viscosity: 105±3 KU
VOC content: 0g/L
Solid Content (by weight): about 55%
Recommended film thickness per coat:
Wet: 70μm Dry: 30μm
Theoretical coverage per coat: 8m2/kg/coat
Average dry time at 77°F/25℃:
To touch: 0.5-1 hours
Recoat: 4 hours
Dilution Ratio (%, with tap water): 10% (vary depending on application method)
Application Method: Brush, Roller, or Spray
Recommended Paint System:
2 coats of putty filler
1 coat of anti-alkali primer
2 coats of 725-SNW2000 topcoat
1.Remove all loose or powdery paint residue by brushing and scraping with a stiff fiber brush
2. Fill any minor cracks with an appropriate filler
3.Surface should be flat and sanded smooth
Recoat interval should be over 4 hours (depend on touch dry).
Shelf Life: 12 months in sealed cans
Life Span after application: 8 -10 years on the wall
Storage: Store in cool, dry and good ventilated place. Temperature range: 0℃-35℃.
Notes for use:
Mix well after paint can is opened.
To prevent hardening of the paint, the can should be closed during the interval of application. Thinned paint should not be poured back to the original can.
Recoat interval should be prolonged in winter. To prevent the surface from erosion and avoid the precipitation of alkaline component, wall surface drying time should be relative long
Stop application when temperature is below 10℃, or humidity over 85%.
Apply with matching primer for best performance.
For information of Manufacture Date, Lot No., Net weight and Expiring Date, please refer to the product label.
Use soap and water.
Clean all equipment with clean water immediately after use and prevent unused paint from freezing.