Elastic Exterior Wall Paint

Elastic Exterior Wall Paint

Elastic Crack Resistance Exterior Wall Paint
Chat Now

Product Details

Product features: 725-SGW4010

1.Excellent adhesion performance

2.Super aging resistance

3.High elasticity

4.Low temperature resistant -30 degree,Don't lose elasticity.

Application:

It is Suitable for exterior wall decoration as noble residential ,hotels and edifices .

Technical parameter:

Component:

waterborne acrylic resin, titanium dioxide, a variety of additives

For roll & brush: paint 100 :

water ≤ 15

For spray:

paint 100 : water ≤ 20

Scrubbing resistance:

more than 2000 times

Strong adhesion Artificial:

ageing time is greater than 500 hrs

Colour:

According to customer requirements

Theoretical Coverage :

6-8/kg

Drying Information:

Touch Dry:2H. Hard  Dry : 4H.

Pack Size :

 20KG

Storage condition:

Store in a cool(0-40) and dry place, away from the fire source.

Construction process:

Putty

Dry time: more than 24 hrs

Sanding with 320# sanding paper

Primer paint

Coating weight: 10-12sq.m /L/ one coat

Dry time: more than 24 hrs

Sanding with 320# sanding paper

Finish paint

Coating weight: 10-12sq.m /L/ one coat

Recoat

Recoat time: more than or equal to 2  hrs

Surface preparation:

1.Remove all loose or powdery paint residue by brushing and scraping with a stiff fiber brush.

2. Fill any minor cracks with an appropriate filler.

3.Surface should be flat and sanded smooth.

4:Recoat interval should be over 4 hours (depend on touch dry).

5:Shelf Life: 12 months in sealed cans.

6:Life Span after application: over 3 years on the wall. 

7:Storage: Store in cool, dry and good ventilated place. Temperature range: 0℃-35℃.

Notes for use:

1:Mix well after paint can is opened.

2: To prevent hardening of the paint, the can should be closed during the interval of application. Thinned paint should not be poured back to the original can.

3:Recoat interval should be prolonged in winter. To prevent the surface from erosion and avoid the precipitation of alkaline component, wall surface drying time should be relative long

4:Stop application when temperature is below 10℃, or humidity over 85%.

5:Apply with matching primer for best performance.

6:For information of Manufacture Date, Lot No., Net weight and Expiring Date, please refer to the product label.

 Cleanup

1:Use soap and water.

2: Clean all equipment with clean water immediately after use and prevent unused paint from freezing.

 

Inquiry